EN
AI Summary
The 503U-3-C CNC Hydraulic 3-in-1 Busbar Processing Machine combines punching, shearing and bending for Australian switchgear and distribution workshops that want one footprint instead of three separate stations. Sea freight to Australian ports and WhatsApp/WeChat after-sales support are available. Confirm max section, tooling and power supply before ordering.
Note: figures below are typical factory test conditions used for acceptance trials; confirm certified results on your order.
Test conditions (typical factory acceptance, copper busbar 10×100 mm): punching concentricity within ±0.15 mm and burr height under 0.2 mm after shear, compared with a ±0.4 mm / 0.5 mm burr baseline from a conventional non-CNC station.
Test conditions (typical factory acceptance, mixed copper/aluminium programme): average changeover between punch, shear and bend under 90 seconds with preset tooling, versus 4–6 minutes on separately staged manual stations used as the comparison baseline.
The 503U-3-C is a professional hydraulic 3-in-1 busbar processing machine that combines bending, punching and cutting in a single robust unit. With a maximum thickness of 16 mm and a maximum width of 200 mm, it is ideal for fabricating busbars for switchboards, control panels and transformer assemblies.
Features: three independent working stations (punch, shear, bend), CNC positioning for precise hole patterns, high-pressure hydraulic system for clean cuts and bends, and an ergonomic control panel for fast setup.
The machine supports multi-hole simultaneous punching and quick tool changes, making it a versatile choice for small and medium workshops.
